Loom Bracelet for Beginners

Loom Bracelet for Beginners

Posted 2014-06-19 by Jane Streetfollow
Here's how to make an easy loom bracelet for beginners. I bought a cheap kit with a loom and elastic bands, but the instructions were very hard to follow. I hope you find these clearer.



Time: 20 minutes
Age: 5 to 10s, Over 10s
Level: Easy

Materials
  • Loom
  • Loom rubber bands
  • Loom 's' closures

  • Method
  • Position the loom in front of you with the plastic pegs making 'u' shapes.
  • Place an elastic loom band over two pegs to make a diagonal.

  • Make a diagonal on the u shaped pegs


  • Overlap a loom band on the second peg and place onto a third peg to make a diagonal zig zag.

  • Make a zig zag


  • Keep going placing the loom bands in a zig zag shape up the loom. I stopped slightly short of the end.




  • At the end, turn the loom round 180 degrees so that the plastic pegs now make 'n' shapes in front of you.

  • Turn the board around until the pegs make n shapes


    It's now time to 'weave' the elastic together.

  • With the hook, pick up second elastic from the second peg and lift it out over the second peg, placing it forward onto the third peg.

  • Hooking the pink elastic on the second peg


    Lifting the pink elastic off the second peg


    Hooking the pink elastic onto the third peg


  • With the hook, pick up the third elastic from the third peg and lift it out over the third peg, placing it forward onto the fourth peg.

  • Hooking the blue elastic on the third peg


    Lifting the blue elastic off the third peg


    Hooking the blue elastic onto the fourth peg


  • With the hook, pick up the fourth elastic from the fourth peg and lift it out over the fourth peg, placing it forward onto the fifth peg.

  • Keep going until you have hooked forward all of the elastics.

  • All of the elastics hooked forward


  • Hold on to one end and lift the bracelet carefully from the loom.



  • Thread the single band at one end through the double band at the other end and fasten the single band onto the plastic 's' fastener in your loom kit.



  • Attach the other end of the 's' fastener to the bracelet to complete it.

  • Bracelet fastened closed with the s fastener


    Your loom band bracelet is now ready to wear. Have fun experimenting with different colour patterns.





    If you liked this project, why not have a go at finger knitting ?

    Categories
    #5_to_10s
    #over_10s
    #easy
    #jewellery
    #loom
    #rainbow_loom
    #bracelet
    #weaving

    %mykidcraft
    238683 - 2023-07-18 04:09:57

    Tags

    Easy
    5_to_10s
    Under_5s
    Any_age
    Over_10s
    Cheap
    Medium
    Recycled
    Paint
    Christmas
    Greeting_card
    Decoration
    Fun_food
    Easter
    Animals
    Copyright 2024 OatLabs ABN 18113479226